Conductive silver adhesiveIt is an advanced technology product widely used for the installation of scanning electron microscopy (SEM) and scanning probe microscopy (SPM) samples. This conductive silver adhesive has high adhesiveness and can be cured at room temperature, making it very suitable for bonding various material samples.
Compared to other similar products,
Advanced Institute of Technology Conductive Silver AdhesiveA significant feature of it is that it can directly bond various materials such as ceramics, glass, metals, plastics, glass fibers, etc. without the need for special surface treatment before use. This is due to the presence of a small amount of special polymer in the conductive silver adhesive, which endows it with unique adhesive properties without compromising its excellent air drying performance.
The high content of silver solids in conductive silver paste gives it excellent air drying properties, which is also one of its important advantages in SEM and SPM sample installation. By using a silver glue brush, users can easily apply suitable silver glue on the sample. Once the silver gel is dried and solidified, it can also be diluted with silver gel diluent in an ultrasonic cleaner to further improve its effectiveness.
The curing time of conductive silver paste is related to the thickness of the coating, and it can fully conduct and bond after 24 hours at room temperature. If the conductive silver paste is cured at a temperature of 60 ℃, it only takes 1 hour. At higher temperature ranges, such as 100 ℃ -150 ℃, conductive silver paste can quickly cure in only 15-30 minutes and achieve better bonding effects. Therefore, according to actual needs, suitable temperature and curing time can be selected when using conductive silver paste.
It should be noted that the curing time of silver paste is directly proportional to the thickness of the coating, that is, the thicker the coating, the longer the curing time. Therefore, when using conductive silver paste, the amount of silver paste to be used should be determined based on the requirements of the sample and the thickness of the coating to ensure the best curing effect.
In short, Advanced Institute of Technology
Conductive silver adhesiveIt is very convenient and flexible to use, and can be cured at room temperature without the need for special treatment of the sample. It has high viscosity, excellent air drying properties, and good bonding effect, suitable for bonding various material samples. By adjusting the curing temperature and time, better curing effects can be achieved.
Conductive silver adhesiveThe widespread application of this technology will provide more convenience for researchers and laboratories.
